MSH equipment CA Eco 40, Руководство пользователя

Страница: 5 / 34

5 Eco 40-55-75 manual revision 01/10
2 MACHINE DESCRIPTION
2.1 PRINCIPLE OF OPERATION
This C.A.V. exhauster is made of a load bearing frame on which mechanical, electromechanical, electronic
and pneumatic devices or units are installed and are used, altogether or combined with one another, for
suction and filtering of the dust resulting from dry sanding primer or filler/surfacer.
The machine description specifies the intended use for which the product was designed, produced and
protected. Any different use or failure to comply with the following specifications could create danger for
persons and/or property.
The model described herein consists of some main and auxiliary units, whose functions are listed here
below and are aimed at carrying out a production cycle under safety conditions.
Please exclusively contact directly the AUTHORISED AFTER-SALES SERVICE for further details or
specifications.
2.2 MAIN COMPONENTS
The machine consists of the following main components:
1. Operator
control panel
2. Filter holder cylinder
3. Dust collector cylinder
4. Motor guard
5. Bedplate
2.3 MACHINE STRUCTURE
Unit bedplate and main parts are made of a stiff metal structure. Removable filtering unit includes dust
collection bin. Exhauster is completely enclosed by a front metal guard. A control panel with controls for
operation and adjustment is installed in the main electric panel. Power supply connections are realised by
means of power and control cables.
2.4 DIMENSIONS
Overall dimensions are specified under paragraph 2.9 -Specifications.
2.5 AMBIENT CONDITIONS
The Exhauster does not require any special ambient conditions. Nevertheless, it shall be installed in a well-
lit industrial building, featuring suitable minimum guaranteed air change.
Ambient temperature for correct unit operation shall be in the range +5°C to +40° C.
2.6 LIGHTING
Room lighting shall comply with the prevailing rules in the country where the machine is installed. In the
area where the Exhauster is installed, good visibility shall be ensured for easier routine and extraordinary
maintenance. Minimum recommended illumination: 400 lux.
2.7 VIBRATIONS
If unit is used according to the instructions for correct use, vibrations shall not create any dangerous
situation.
2.8 NOISE EMISSIONS
The Exhauster is designed and manufactured to limit noise emissions at the source.
Maximum noise level is 75dB. Actual noise emission shall in any case be measured after
installation, in order to ensure that it still conforms to the specifications required by the prevailing
laws.
1
4
2
3
5