MSH equipment CA Eco 40, Руководство пользователя

Страница: 17 / 34

17 Eco 40-55-75 manual revision 01/10
3) Filter cartridge
•
Cut off power supply and compressed air
(see relevant procedures in the previous
pages);
•
Disconnect Ø100 inlet hose from inlet manifold;
•
Remove the dust collector cylinder;
•
Remove the filter holder cylinder;
•
Loosen nut under cartridge;
•
Set the new cartridge in place, ensuring to set
it at the centre and that the seal correctly sets
against the plate;
•
Tighten the nut, do not squeeze seal too much
(nut finger tight + two turns);
•
Refit the filter holder cylinder;
•
Refit the dust collector cylinder;
•
Refit the vacuum connection line between
cylinders.
•
Reconnect the Ø100 hose.
4) Dedusting device
•
Cut off power and air supply (see relevant
procedures in the previous pages);
•
Proceed as described in step 3 until removing
the filtering cartridge;
•
Loosen the dedusting device and renew it;
•
Reassemble as indicated in item 3.
5) Motor
•
Cut off power and air supply (see relevant
procedures in the previous pages);
•
Contact Authorised After-sales Service.
6) Silencer
•
Cut off power and air supply (see relevant
procedures in the previous pages);
•
Remove the silencer unit, ensuring no foreign
objects can fall inside the turbine outlet
tube;
•
Blow compressed air at 6 bars inside the
silencer;
•
Reassemble the silencer unit.