MSH equipment CA Eco 40, Руководство пользователя

Страница: 11 / 34

11 Eco 40-55-75 manual revision 01/10
4.6 CONNECTIONS
To avoid any problem upon Exhauster start-up, follow the instructions below.
4.6.1 PNEUMATIC CONNECTIONS
Figure 4. 6. 1A- Pneumatic System Layout
Connection to the air supply is ensured by a flexible hose secured with screw clamps.
The mobile connection is supplied together with the Exhauster.
The standard Exhauster comes with regulator unit.
Air supply requirements:
•
Operating pressure: 5 bars
•
Maximum pressure: 10 bars
Connect compressed air supply to the connection, by
inserting a gate valve (to be supplied by Customer) on the
pre-set line so that the supply can be cut off during
maintenance. It is strongly recommended to feed the machine
with dry compressed air.
Compressed air of the supply line must be completely
dry, i.e. treated upstream of the exhauster. It is
recommended to install a 5 micron air filter.