manualshive.com logo in svg

MSA 9010 SIL, Руководство по эксплуатации

Поделиться
Скачать
MSA 9010 SIL Скачать руководство пользователя страница 7

6

Safety Regulations

GB

Model 9010/9020 SIL

WARNING!

This device is supporting life and health. Inappropriate use, maintenance or servicing may affect 
the function of the device and thereby seriously compromise the user's life.
Before use the device operability must be verified. The device must not be used if the function test 
is unsuccessful, it is damaged, a competent servicing/maintenance has not been carried out, 
genuine MSA spare parts have not been used.

Alternative use, or use outside this specification will be considered as non-compliance. This also 
applies especially to unauthorised alterations to the device and to commissioning work that has 
not been carried out by MSA or authorised persons.

1.2

Liability Information

MSA accepts no liability in cases where the device has been used inappropriately or not as 
intended. The selection and use of the device are the exclusive responsibility of the individual 
operator.
Product liability claims, warranties and guarantees made by MSA with respect to the device are 
voided, if it is not used, serviced or maintained in accordance with the instructions in this manual.

Содержание 9010 SIL













































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды