MSA 9010 SIL, Руководство по эксплуатации

Страница: 29 / 76

28
Operation
GB
Model 9010/9020 SIL
4.4 Example for Use of the Keys for Access to the Access Codes
(1) Press ENTER key for 3 seconds until the green POWER LED starts blinking.
(2) Press the UP or DOWN key to select password. Then confirm with ENTER key.
(3) Press the UP or DOWN key to select a desired Access Code number. Then confirm with
ENTER key
(4) For 9020 only:
a) CHa appears in the upper display.
b) Press ENTER to operate with channel A.
c) Press the UP key to operate with channel B
d) Press ENTER key to confirm the choice.
P1 appears in the upper display.
(5) Press the UP or DOWN key to select a desired function (e.g. P1). Confirm with ENTER key.
(6) Press the UP or DOWN keys to modify as necessary.
(7) Press ENTER key to accept a new setting or press ESCAPE to leave it without change.
In order to exit the configuration menu, press ESCAPE. Depending on the position in the menu, it
may be necessary to press ESCAPE several times.
The Control Unit automatically returns step by step to regular operation if the keys are not
pushed within two minutes (TIME-OUT function).
The TIME-OUT function may possibly be disabled (see chapter 5.2).