OptiSwitch 2400/L3
Getting
Started
C
HAPTER
2
21
■
SNMP Configuration Mode:
SNMP Configuration. Enter this
mode by typing
snmp
from the Global Configuration mode.
The (config-snmp)# prompt is displayed.
{
XE "Configuration
modes:SNMP"
}{
XE "SNMP configuration mode"
}
Initial Configuration
Prior to interface configuration, you must prepare information and
set up the OptiSwitch-2400/L3 properly. The following procedures
are recommended to ensure optimal functioning of the router.
{
XE
"Inital configuration"
}{
XE "Configuration:initial"
}
Preparing to Configure
{
XE "Configuration:preparing"
}
The following prerequisite information is required to configure the
OptiSwitch-2400/L3.
■
A map of your network topology.
■
The network protocols you are supporting.
■
The routing protocol to be used for each network protocol.
■
The IP addresses and the subnet masks for each network
interface.
■
The IP addressing plan for each network protocol.
