mru OPTIMA 7 BIOGAS, Руководство пользователя

Страница: 11 / 60

MRU Instruments, Inc. USER MANUAL OPTIMA 7 BIOGAS
11
3 SAFETY INFORMATION
The following safety procedures must to be followed at all times. They are a significant and essential part of this manual.
Failure to follow safety procedures can result in the loss of your warranty claims.
3.1 Safety regulations
1. The OPTIMA 7 BIOGAS analyzer may only be used as indicated in this manual.
2. Our analyzers are checked according to the following regulations:
VDE 0411 (EN61010) and DIN VDE 0701 before they leave the MRU GmbH factory.
3. MRU technical products are designed and manufactured according to DIN 31000/ VDE 1000 and
UVV = VBG 4 of the professional guilds for fine mechanics and electrical engineering.
4. MRU GmbH assures that the analyzer complies to the essential requirements of the legal regulations of the member
states of the electro-magnetic compatibility (89/336/EWG) and to the low-voltage regulations (3/23/EWG).
3.2 Specific safety regulations
1. Use only the battery charger supplied with the analyzer for this instrument.
2. No part of the analyzer, including the metal probe tube and all other metal parts & accessories are to be used as
electric conductors.
3. The analyzer is not to be used in or under water.
4. The analyzer is not to be placed near or directly exposed to open fire or heat.
5. The specified probe temperature range is not to be exceeded, as the probe, temperature sensory mechanism and
sensor could be damaged or destroyed.
6. The analyzer may not be dropped.
7. Caution: Moisture, being pumped out of the condensates trap can be slightly acidic.
In case of skin contact IMMEDIATELY: clean affected parts of the body.
Avoid getting liquid in eyes.
Please carefully clean all parts that come into contact with the condensates.
8. After measurement, vent the analyzer with ambient air and allow the probe to cool.
A hot probe could cause burns or ignite flammable material.
9. The fumes from certain materials (for. example, cleaners, petrol, spirit, varnish) may damage the sensors of the ana-
lyzer. Do not store or use these or other similar fluids near the analyzer.
Your quality management MRU GmbH