mru MGAprime, Руководство пользователя

Страница: 35 / 126

USER MANUAL
MGAprime
MRU GmbH, D-74172 Neckarsulm
35 / 126
If averaging is activated, the average values are displayed in the measure-
ment window.
NOTE
Please note that average values are displayed immediately
in the measurement window, even if the set time interval
has not yet been reached. The average value is then calcu-
lated from the values read so far. As soon as the set time
interval has been reached, the average value is constantly
recalculated by replacing the last value read with the cur-
rently read value.
5.7. Interval measurement
You have the possibility to perform an Interval measurement.
You can set the duration of the Measurement time, the duration of the
Standby time and the amount of the Measurement cycles.
The analyser will go into standby mode between intervals.
►
Open the menu Settings.

See also Chapter 5.1 Open menu Settings, Page 26.
►
Press Interval measurement.

A window appears.
►
Press SET TIME / SET AMOUNT to set the duration of the Standby time, the
duration of the Measurement time and the amount of Measurement cy-
cles.

A separate input window appears for each setting.