mru AirFair OPTIMA 7 NDIR, Руководство пользователя

Страница: 29 / 58

MRU GmbH USER MANUAL OPTIMA 7 - NDIR
29
11.8 Power ON and zeroing
Press the ON key . The analyser will start zeroing without any further action from the user.
The probe shall NOT be installed in the stack during zeroing!
While the analyser is zeroing you will see a blinking
symbol in the task bar indicating the
progress of zeroing.
Once the zeroing cycle is finished the analyser is ready for measurement.
If any defective sensors will be detected during the zeroing cycle you will get an error message on
the display.
Repeating the zeroing
The zeroing can be repeated at any time as long as the probe is not inside the stack. In the main
menu you select “Zeroing”, and after the displayed message press the OK key.
OK
,
Zeroing
OK Start zeroing