MRMC MRMC-1465-06, Быстрый старт

Страница: 7 / 28

Pan Bars Quick Start Guide
3
Connecting the cables
1. Connect the Focus controller cable to the
FOCUS
port in the Pan Bars panel and Focus
controller. Ensure that the red markers on the
plug and socket are aligned.
2. Connect the Zoom controller cable to the
ZOOM
port on the Pan Bars panel.
3. Connect the Ethernet and power cables, as shown. Your Pan Bars
configuration can have an MHC or Flair PC which is in turn
connected to the head via Ethernet or you can use MSA Joystick
controller from MRMC via Ethernet which need not be connected
to a PC.
4. Add the Pan Bars as a device in MHC Admin login (if applicable).
For more information on this, refer to the MHC Quick Start Guide.
You can now use the Pan Bars to control the currently active head in
MHC.
Enable button
Enable is a toggle button; pressing it allows the head to be controlled by
Pan Bars. Releasing this button allows you move the Pan Bars without
changing the head position.
Note
If you are not using the Zoom controller, disable it in the software.