MRMC MRMC-1465-06, Быстрый старт

Страница: 11 / 28

Pan Bars Quick Start Guide
7
Your first session
Instructions for using the head with a specific controller, are beyond the
scope of this manual. When you want to use the Pan Bars, you typically
need to perform the steps given below. Refer to the manual that came
with your head for details.
1. Attach the cables to the Pan Bars, Ethernet Mimic box, Surface Pro
and head, as described in the previous section. Make sure the
relevant indicators light up; for example, the power indicator LEDs
on all 24Volt power supply bricks (
), and the power indicator
LED on the head ( ).
2. Focus control has to be physically set to zero before booting up the
PC. To do this, fully rotate the Focus knob anticlockwise on the
joystick to zero the focus axis.
3. Press the
POWER
button on Surface Pro.
4. Set up the head using MHC software installed on Surface Pro.
Turning off the system
There’s no power switch on the Pan Bars; power is turned off by removing
the power cable for Ethernet Pan Bars or removing the Expansion cable
for Mimic only Pan Bars.
Note
It is a good idea to attach the power cables last, after all the
other cables are in place.
It is also recommended that you power up Surface Pro last,
after powering up the head, as powering up two devices
simultaneously on the same Ethernet network can cause
communication problems.