MRMC MRMC-1465-06, Быстрый старт

Страница: 14 / 28

Pan Bars Quick Start Guide
10
Pan Bars Quick Start Guide Pan Bars Quick Start Guide
Chapter 2 Pan Bars Flair Setup
Setting up Ethernet Pan Bars as Mimic Device in
Flair
You can use the Ethernet connected Pan Bars as mimic device in Flair.
You can add up to two mimic devices in Flair, which Flair refers to as
MimicBoard1 and MimicBoard2. Each mimic device has upto eight
mimic control axes allocated to it in Flair, and Flair automatically
numbers these using the next available numbers. For example Mimic Axis
9, Mimic Axis 10, etc.
The procedure below tells you how to configure Flair to recognise the Pan
Bars.
1. Make sure the relevant cables are attached as described in the
previous section.
2. Edit the file
C:\Flair\Flair6\Flair.ini
. This file is a text file
that you can edit with any text editor such as Notepad, either
directly or by using the Flair menu option
Help > View .ini File .
You need to add or edit some lines in the file similar to the following
lines.
*NetworkBoards: 3
*NodeProgram3: Uni6Ether_II.btl
*MimicBoard1: 3
*Autorecalibrate:True
*LoadfromHC:True
Hint
When connecting a Flair PC with the Pan Bars using an Ethernet
connection, you might need to temporarily disable the
Wi-Fi
connection on the laptop so that Flair does not try to use it to
connect to the Pan Bars. (In the laptop’s Network and Sharing
Center, click on
Change Adapter settings , right-click on Wireless
Network Connection and in the pop-up menu choose Disable .)