Operation Of Buttons
Page 4
mrcool.com
MODE
FAN
TE MP
S LE E P
ON/OFF
SILENCE
FP
TIME R
ON
TIME R
OFF
1
2
4
3
5
6
SWING DIRECT
LED FOLLOW
ME
TURBO SELF
CLEAN
8
9
7
10
12
11
13
14
UP Button
Push this button to increase the indoor temperature
setting in 1° increments (°F or °C depending on mode)
up to 86°F (30°C).
DOWN Button
Push this button to decrease the indoor temperature
setting in 1° increments (°F or °C depending on mode)
down to 62°F (16°C).
SILENCE/FP Button
• Activates or disables the
SILENCE
function. If pushed for
more than 2 seconds, the '
FP
' function will be activated;
pushing more than 2 seconds again disables this function.
• When the
SILENCE
function is activated, the compressor
will operate at a low frequency and the indoor unit will
create a faint breeze that will reduce the noise to the
lowest level and create a quiet and comfortable
environment. Due to low frequency operation of the
compressor, insufficient cooling and heating capacity may
occur.
• The '
FP
' function can only be activated during the heating
operation (only when the setting mode is
HEAT
). The unit
will operate at a set temperature of 46°F (7.8°C).The
display window of the indoor unit will display '
FP
'. Pressing
ON/OFF
,
SLEEP
,
FP
,
MODE
,
FAN SPEED UP
or
DOWN
during operation will cancel the '
FP
' function.
TIMER ON Button
Press this button to initiate the auto-on time sequence.
Each press will increase the auto-timed setting in 30
minute increments. When the time setting displays
10.0, each press will increase the auto-timed setting by
60 minute increments.
To cancel the auto-timed program, simply adjust the
auto-on time to 0.0.
7
8
9
NOTE
Temperature control is not available in
FAN
mode.
Press and hold
UP
and
DOWN
buttons together for
3 seconds to alternate the temperature display
between the °F & °C scale.
