How To Use The Buttons
Page 7
mrcool.com
4
MODE
FAN
TE MP
ON/OFF
TIME R
ON
TIME R
OFF
1
3
2
MODE
FAN
TE MP
ON/OFF
SILENCE
FP
SILENCE
FP
TIME R
ON
TIME R
OFF
1
2
LED FOLLOW
ME
LED FOLLOW
ME
TURBO SELF
CLEAN
TURBO SELF
CLEAN
SWING DIRECT
SWING DIRECT
S LE E P
S LE E P
Auto Operation
Ensure the indoor and outdoor unit is properly wired to an appropriate power
source and the power is on. The display should be lit on both the remote and
indoor unit (assuming the indoor unit has not been turned off by using the
LED
button on the remote).
1.
Press the
MODE
button to select
AUTO
.
2.
Press the
UP/DOWN
button to set the desired temperature. The
temperature can be set within a range of 62°F (16°C) to 86° F (30°C), and
adjusted in 1° increments (°F or °C depending on mode).
Cooling/Heating/Fan Operation
Ensure the unit is properly wired to an appropriate power source
and the power is on.
1.
Press the
MODE
button to select
COOL
,
HEAT,
or
FAN
mode.
2.
Press the
UP/DOWN
button to set the desired temperature. The
temperature can be set within a range of 62° F (16°C) to 86° F (30°C) in 1°
increments (°F or °C depending on mode).
3.
Press the
FAN
button to select the desired fan setting. The fan settings are:
Auto, Low, Med, or High.
NOTE
1.
In
AUTO
mode, the air conditioner can automaticallly select the
appropriate mode (
COOL
,
FAN
, or
HEAT
) by sensing the difference
between the actual ambient room temperature and the
temperature setting on the remote control.
2.
In the
AUTO
mode, you cannot adjust the fan speed. It will be
automatically controlled.
3.
To deactivate
AUTO
mode, the select desired mode manually on
the remote.
NOTE
In the
FAN
mode, the setting temperature is not displayed on the
remote control, and it will not control the room temperature. In this
case, only steps 1 and 3 may be performed.