MRC MG-3003SD, Руководство по эксплуатации

Страница: 7 / 23

4. MEASURING PROCEDURE
4-1 AC/DC magnetic field measurement
1) Power ON the meter by pressing and holding the " Power
Button " ( 3-2, Fig. 1 )for at least 1.5 seconds .
2) magnetic field measurement Function 'DC' or 'AC' select
by pressing and holding the " FUNCTION Button " ( 3-6, Fig. 1 )
until function DC change to AC or function AC change to DC.
3) magnetic field measuremen range select
by pressing and holding the " Range Button " ( 3-5, Fig. 1 ) until
' Range 1' change to' Range 2' or 'Range 2' change to' Range 1' .
4) unit selection :
How to select the unit ( mT, G), the procedures please
refer to chapter 7-7 " Change the unit ( mT, G ) ", page 18 .
Under mT unit Under G unit
RANGE 1
RANGE 2
RANGE 1
RANGE 2
Fig. 2
5