MRC MG-3003SD, Руководство по эксплуатации

Страница: 20 / 23

7-6 SD memory card Format
When the lower display show " SD- F "
1) Use the "
▲
Button " ( 3-5, Fig.1 ) or "
▼
Button " (3-6
, Fig.1 ) to select the upper value to " YES " or " NO ".
YES - Intend to format the SD memory card
NO - Not execute the SD memory card format
2) If select the upper to " YES ", press the " Enter Button
" ( 3-8, Fig. 1 ) once again, the Display will show text
"YES ENTER " to confirm again, if make sure to do the
SD memory card format, then press " Enter Button "
once will format the SD memory clear all the existing
data that already saving into the SD card.
7-7 Select the magnetic field. unit to mT or G
When the lower display show "UNIT "
1) Use the "
▲
Button ( 3-5, Fig.1 )" or "
▼
Button "(3-6,
Fig. 1 ) to select the upper Display text to " mT " or " G ".
mT - magnetic field unit is mT
G - magnetic field unit is G
2) After Display unit is selected to " mT " or " G", press the
" Enter Button " ( 3-8, Fig. 1 ) will save the setting
function with default.
18