mr
.
steam
®
Controls
__________________________________________________________________
4
Do not route iSteam 2.0 control wiring
inside conduit together with power lines or close to hot
water or steam piping. Doing so may result in an inop-
erative or hazardous installation. Do not alter or modify
any Mr. Steam products including the steam generator
or iSteam 2.0 control. Doing so may result in an inopera-
tive or hazardous installation and will void the warranty.
IMPORTANT NOTES:
• The iSteam 2.0 Control is designed to be flush
mounted. However, the control may be surface
mounted when conditions permit. Consult a MrSteam
Customer Service or Technical Service representative
to determine if the iSteam 2.0 control can be surface
mounted.
• Turn power to the steam generator OFF before
connecting the control to the generator. Failure to turn
the power off will result in an inoperable control.
• Do not operate the iSteam 2.0 control with other than
a Mr.Steam iSteam 2.0 compatible steam generator.
Mr.Steam residential steam generators with serial
numbers lower than 930030, or any other brand of
steam generator are not to be operated with iSteam
2.0 controls. Doing so may result in an inoperative
installation. If your generator’s serial number is lower
than 930030 contact Mr.Steam Technical Service for
upgrade options and components to enable your
steam generator to function with iSteam 2.0.
• This document contains important safety, operation
and maintenance information. Leave this document
with the homeowner. Do not discard this document.
• Discontinue use of the steam generator or control
if the steam generator is damaged or otherwise not
functioning properly. Doing so may result in an inop-
erative or hazardous installation
• Refer to the Steambath Generator Installation,
Operation and Maintenance Manual PN 100472 for
locating and installing the steamhead.
Do Not alter or modify any Mr. Steam
products. Doing so may result in an inoperable or
hazardous installation and will void the warranty.
Before Installing
To avoid unintentional steambath op-
eration, do not locate the control where other controls,
accessories, shower heads, valves, body sprays or simi-
lar within the shower could cause confusion or interfere
with the Mr.Steam control’s intended use and function.
• Do not use the iSteam 2.0 control without reading
and understanding the Mr.Steam steam generator
Installation and Operation Manual (PN 100472).
• A peel and stick warning sticker is provided in the
Mr.Steam steam generator Installation, Operation
and Maintenance Manual. This manual is provided
with every steam generator. The warning sticker must
be read and permanently affixed in a conspicuous lo-
cation near the steam room. Failure to read and affix
this warning sticker in a conspicuous location may
result in serious injury or death. Please call Mr.Steam
at 800 767-8326 for a free replacement or if you have
any questions regarding the warning sticker.
• If an iSteam 2.0 control is installed outside the steam
room a Remote Temperature Probe (PN iMSTS) must
be installed inside the steam room per installation
instructions supplied with the Remote Temperature
Probe. Failure to install according to instructions will
result in an inoperative control and overheating of
the steam room.
WARNING
!
WARNING
!
CAUTION
!
CAUTION
!
