ChromaSteam
®
The ChromaSteam is an optional accessory that
activates colored lights in the steam room. Press
the CHROMA button to turn it ON. Turn the
button OFF then back ON to select the desired color.
Press again to turn the lights OFF.
AudioWizard
™
2.0
iSteam
®
2.0 Interface
Press the MUSIC button to access the AudioWizard
screen. The AudioWizard will automatically turn on when
audio is sent to it. AudioWizard automatically enters sleep
mode 2 minutes after music stops.
Previous Track
(Bluetooth® only)
Play/Pause
(Bluetooth only)
Next Track
(Bluetooth only)
Increase Volume
Decrease Volume
mr
.
steam
®
Controls
__________________________________________________________________
10
Set Temperature Screen
Press the TEMPERATURE button on the Dashboard
to access the SET TEMPERATURE screen.
The control is preset and will display a temperature set-
ting of 110
°
F (default setting). Swipe your finger from left
to right to adjust the desired temperature (80
̊
- 120
̊
F) in
one degree increments.
Press CANCEL to return to the Dashboard without chang-
ing the time. Press HOME to return to the Dashboard, sav-
ing the time for this steambath session only. Press SAVE to
save the time setting as the new default or as the selected
user setting.
Changing the Temperature Units
(°F/°C)
Press the UNITS button in the lower right corner of
the SET TEMPERATURE screen to change from Fahr-
enheit to Celsius. Press the SAVE button to
accept the new value and exit.
Memory Feature
If the control is turned off manually before it times out
then the default settings of 20 minutes and 110°F will
8:19 AM
HOME
SAVE
F
C
CANCEL
STOP
SET TEMPERATURE
USER 1
99˚ F
8:19 AM
ACCESSORIES
˚F / ˚C
TOGGLE
TEMP
F
C
Temperature
(swipe area)
AromaSteam
The AromaSteam is optional accessory that
automatically infuses aromatic oils into the steam
flow. Press the AROMA button to turn it ON.
The AromaSteam turns OFF automatically when
the steam generator stops. Press the AROMA
button to turn it OFF during a steam session.
STOP
8:19 AM
MUSIC
>>
AUX
&
Return to
Previous Screen
Bluetooth Pairing
Button
be used the next time the control
is turned on. If the control times out
(not manually turned off) then the previous user
time and temperature settings will be used when
the steambath is used again.
User Preferences (User1 and User2
)
Press USER 1/USER 2 button. Enter the preferred
time and temperature settings and press SAVE.
iSteam 2.0
®
will automatically save the settings.
To recall the user preferences press USER 1/USER
2 the next time the steambath is used.
If you are using a Bluetooth audio source, it must be
connected for functions to work. Please refer to the
Bluetooth
®
pairing instructions in this manual.
Please note that the Play/Pause and Change Track
functions apply to Bluetooth only, and will not work
when playing audio from a hard wired music source.