mr
.
steam
®
Controls
__________________________________________________________________
15
Care Tips
Use only mild soap and water on a soft cloth to clean
the control. Do not use abrasive cleansers
Safety and Operating Information
Set the steam bathing duration and tempera-
ture according to personal preference, however it is highly
recommended to begin steam bathing at a low temperature
setting to gauge comfort and safety levels. Set the duration
at 10 minutes max. to gauge comfort and safety levels. This
will allow the steam generator to heat up and begin produc-
ing steam.
Do not use any iSteam 2.0
®
control without
reading and understanding the Mr.Steam
®
steam generator
Installation and Operation Manual (PN 100472). Failure to
read and understand these instructions may result in an in-
operative or hazardous installation.
A peel and stick warning sticker is provided in the Mr.Steam steam
generator Installation, Operation and Maintenance Manual. This
manual is provided with every steam generator. The warning
sticker must be read and permanently affixed in a conspicuous
location near the steam room. Failure to read and affix this warn-
ing sticker in a conspicuous location may result in serious injury or
death. Please call Mr.Steam at 800 767-8326 for a free replace-
ment or if you have any questions regarding the warning sticker.
If an iSteam 2.0 control is installed outside the steam room
a Remote Temperature Probe (PN iMSTS) must be installed
inside the steam room per installation instructions supplied
with the Remote Temperature Probe. Failure to install ac-
cording to instructions will result in an inoperative control
and overheating of the steam room.
CAUTION
!
CAUTION
!
CAUTION
!
WARNING
!
Warranty
To view or download the Mr. Steam
®
Control Warranty
and register your product go to:
blog.mrsteam.com/wr
