mr. steam 104480, Инструкция по установке, эксплуатации и обслуживанию

Страница: 17 / 37

16
2
Linear Steam Head
®
®
Installer Section Model 104480
Steambath controls feature an integral or
remote temperature sensor that senses room temperature.
Install the linear steam head in a location where steam
emission will not come in direct contact with the control or
rem ote temperature sensor. Failure to follow these
instructions may result in poor temperature control, a
hazardous condition, scalding or personal injury.
Only use the supplied high temperature
silicone sealant as required to create a permanent moisture
seal. Do not seal the steam head with grout or any other
material. Failure to follow these instructions may result in
leaks, and cause problems associated with leaks, moisture
and property damage from leaks.
The linear steam head must be installed by a
qualified and licensed plumber. Failure to use a qualified
and licensed plumber may result in a leak within the wall
cavity and cause problems associated with leaks, moisture
and property damage from leaks. Failure to follow these
instructions may result in elevated temperatures, a
hazardous condition, scalding or personal injury.
Do not use black iron, galvanized, or plastic
pipe for the steam line. Use only properly rated brass pipe
or copper tubing in accordance with national and local
plumbing codes. Using any piping material other than
properly rated brass or copper piping may cause linear
steam head damage and problems associated with leaks,
moisture and property damage from leaks or steam.
Plumb rigid copper tubing or brass pipe from
the steam generator to the linear steam head. Plumbing
must not form traps or valleys. Failure to follow these
instructions may result in leaks, and cause problems
associated with leaks, moisture and property damage from
leaks. Failure to follow these instructions may result in a
hazardous condition, scalding or personal injury.
Do not modify or alter the linear steam head.
Do not cover, block or insert any product that is not a
MrSteam supplied linear steam head accessory with the
linear steam head. Failure to follow these instructions may
result in a leak within the wall cavity and cause problems
associated with leaks, moisture and property damage from
leaks. Failure to follow these instructions may result in a
hazardous condition, scalding or personal injury.
Do not disassemble the steam head. The steam
head is shipped fully assembled and requires no additional
assembly. Failure to follow these instructions may result in a
leak within the wall cavity and cause problems associated with
leaks, moisture and property damage from leaks.
Before installing the linear steam head, read
and follow the Installation and Operation Manual(s) provided
with all system components ( generator, controls,
accessories...etc.). If the installation and operation manuals are
not available go to www.mrsteam.com for an online copy, or
contact MrSteam Customer or Technical Services at 800-767-
8326 or 800-727-8326 for free copies. Failure to read and
follow all the Installation and Operation Manuals may result in a
leak within the wall cavity and cause problems associated with
leaks, moisture and property damage from leaks. Failure to
follow these instructions may result in inoperable system
components, a hazardous condition, scalding or personal injury.
Consult with the manufacturer of any non-
heat resistant enclosures for elevated temperatures, steam,
moisture compatibility or for suitability for use with steam.
Failure to follow these instructions may result in the damage
or failure of materials or products. Failure to follow these
instructions may result in leaks, and cause problems
associated with leaks, moisture and property damage from
leaks. Failure to follow these instructions may result in a
hazardous condition, scalding or personal injury.
Do not install a Linear Steam Head in an
acrylic/fiberglass tub or shower enclosure. Failure to follow
these directions may cause problems associated with leaks,
moisture and property damage from leaks. Failure to follow
these instructions may result in elevated temperatures, a
hazardous condition, scalding or personal injury.
Do not locate the steam head where steam,
elevated temperatures, moisture or water can contact any
products, wall surfaces, materials, door seals, devices,
electronics that are not designed for use with steam,
elevated temperatures, moisture or water. Failure to follow
these instructions may result in damage or improper
operation of the products, wall surfaces, materials, door
seals, devices or electronics.
The optional diverter reduces the steam
emission zone by redirecting steam up the wall above the
steam head (see page 6). Installation of the diverter may
result in the following:
• Changes to the steam distribution in the room
• Increase of the temperature of the wall and devices above
the steam head
• Surface condensation patterns on the walls and ceiling
Always test the diverter to insure proper safety, installation
and comfort.
Carefully inspect the Linear Steamhead and
packaging for shipping damage. In the event of shipping
damage, please contact the carrier for claim information.
Our customer service department can assist you with
product replacement.
Do not use abrasive cleansers or chemicals to
clean the linear steam head. Use only water with mild soap
and a non-abrasive sponge. The use of abrasive cleansers or
chemicals will damage the finish on the linear steam head.