PAGE 48 — DCA300SSJU4F2 60 HZ GENERATOR • OPERATION MANUAL — REV. #0 (06/26/18)
MAINTENANCE
FUEL WATER SEPARATOR SEDIMENT BOWL
1. Remove the sediment bowl from the fuel water
separator cartridge as shown in Figure 63.
Figure 63. Sediment Bowl
2. Let the residue or foreign substances inside the
sediment bowl flow into a suitable container.
3. Wipe the inside of the sediment bowl with a clean cloth
to remove any foreign matter or debris that may have
accumulated.
4. Reinstall sediment bowl back onto fuel water separator
cartridge
5. Tighten securely.
DO NOT
over-tighten.
FUEL FILTER
WATER SEPARATOR
CARTRIDGE
SEDIMENT
BOWL
FUEL WATER SEPARATOR REPLACEMENT
1. Use a filter wrench to remove the fuel water separator
cartridge (Figure 59) from the cartridge body head.
Figure 64. Fuel Water Separator
2. Wipe the inside of the fuel water separator cartridge
body (head) with a clean cloth to remove any foreign
matter or debris that may have accumulated.
3. Install new fuel water separator cartridge first by hand
until it makes contact with the cartridge body (head)
surface.
4. Tighten fuel water cartridge securely.
DO NOT
over-
tighten.
Removing Water from the Fuel Tank
After prolonged use, water and other impurities accumulate
in the bottom of the tank. Occasionally inspect the fuel tank
for water contamination and drain the contents if required.
During cold weather, the more empty volume inside the
tank, the easier it is for water to condense. This can be
reduced by keeping the tank full with diesel fuel.
CARTRIDGE BODY
(HEAD)
FUEL WATER
SEPARATOR
CARTRIDGE
RETAINING
RING
Содержание WHISPERWATT DCA300SSJU4F2
Страница 13: ...DCA300SSJU4F2 60 HZ GENERATOR OPERATION MANUAL REV 0 06 26 18 PAGE 13 NOTES ...
Страница 62: ...PAGE 62 DCA300SSJU4F2 60 HZ GENERATOR OPERATION MANUAL REV 0 06 26 18 ENGINE WIRING DIAGRAM ECU 845 ...
Страница 73: ...DCA300SSJU4F2 60 HZ GENERATOR OPERATION MANUAL REV 0 06 26 18 PAGE 73 NOTES ...
