PAGE 36 — DCA12SSIU4F 60 HZ GENERATOR • OPERATION MANUAL — REV. #0 (07/20/17)
GENERATOR SHUT-DOWN PROCEDURES
NORMAL SHUTDOWN PROCEDURE
To shutdown the generator, use the following procedure:
1. Place both the
main, aux. and duplex
circuit breakers
as shown in Figure 50 to the
OFF
position.
Figure 50. Main, Aux. and Duplex
Circuit Breakers (OFF)
2. Let the engine cool by running it at low speed for 3-5
minutes with no load applied.
3. Place the
Auto Off/Reset Manual Switch
(Figure 51)
in the
OFF/RESET
position.
Figure 51.
Auto Off/Reset Manual
Sw
itch
(Off/Reset Position)
4. Remove all loads from the generator.
5. Inspect entire generator for any damage or loosening of
components that may have occurred during operation.
MAIN
CIRCUIT
BREAKER
DUPLEX
CIRCUIT
BREAKERS
CS-6369
AUX. CIRCUIT
BREAKERS
OF
F
OF
F
OF
F
OF
F
OF
F
OF
F
OF
F
AUTO
MANUAL
OFF/RESET
(CENTER)
EMERGENCY SHUTDOWN PROCEDURE
1. If equipped (option), push the
Emergency Stop
Pushbutton Switch
(Figure 52).
Figure 52. Emergency Stop Switch (Option)
2. If generator is not equipped with an emergency stop
pushbutton switch , place the
Auto Off/Reset Manual
Switch
(Figure 53) in the
OFF/RESET
position.
Figure 53.
Auto Off/Reset Manual
Sw
itch (OFF)
AUTO
MANUAL
OFF/RESET
(CENTER)
