5 1
Note
If you select the MultiMediaCard as a memory media, it takes more time to finish
transferring tracks.
5. Format the selected memory media if necessary (chapter 3-6).
6. Click on the “Clear List” button if any tracks are listed on the Transfer List.
7. Click on the “Select Tracks From Database” button.
The “Select Tracks From Database” window appears.
Tip
If you have created a play list that contains the tracks selected for transfer, you can select
the play list from the “Select Playlists From Database” window that can be opened by
clicking on the “Select Playlists From Database” button.
8. Select the tracks that you want to transfer to the MP-M700 player by clicking on
the box to the left of each track, then click on “OK”.
You will be notified if you have selected
too many tracks for the selected memory
media.
If this dialog box appears, you must
delete on or more tracks from the
Transfer List or Portable Track List until
the total size of the selected tracks falls
below the available memory of the
memory media.
9. Click on “Close” to close the dialog box.
10.Delete the tracks on at a time until the red porting of the Device Usage bar
disappears by clicking on
after selecting the track on the Transfer List or
Portable Track List.
Transferring tracks to the MP-M700 player
Before starting
•
Before connecting the MP-M700 player to your computer, be sure to fully charge the
battery.
•
Check that the internal Flash Memory or MultiMediaCard has enough available memory
to store the transferred tracks. You can find this information in the Device Usage bar.
•
Check that files to be transferred are not encoded with a bit rate or sampling frequency
outside the range supported by the MP-M700 player. For more information about the
supported bit rates and sampling frequencies, see chapter 5.
•
The following actions are strictly prohibited while transferring music files.
Doing so may cause not only the computer to freeze up but also the memory media to be
damaged.
- Disconnecting the USB cable from the MP-M700 player or the computer
- Removing the battery from the MP-M700 player
- Removing the MultiMediaCard from the MP-M700 player
1. Connect your MP-M700 player to your computer (chapter 2-3).
2. Turn on the player by holding the
button pressed until “CONNECT USB”
appears on the display of the MP-M700 player.
Note
If you connect the USB cable to the MP-M700 player while it is in FM radio reception
mode, the player does not detect that the USB cable has been connected. Switch to the
Memory audio player mode by holding the
button pressed or turn on the player
after turning it off.
3. Click on the “
copy to devices” button to open the Copy to Devices window if it
is not already open.
4. Click on the
to the right of the “Media:” field and select “Internal Memory
(Flash)” or “External Memory (MMC)” from the drop-down list.
5 2
*mp-man MP-M700øµ 01.12.14 1:25 PM
∆
‰¿Ã¡ˆ51
Содержание MP-M700
Страница 1: ......
