Moxa VPort 364 Industrial Video Encoder
Getting Started
3-4
100 Mbps NETWORK LED blinks. The IP address assigned after the POST is completed depends on the network
environment.
Network Environment with a DHCP Server
In this case, the IP address of the VPort 364 is assigned by a DHCP Server. Use the DHCP Server’s IP address
table, or use the Moxa VPort utility to determine the IP address that was assigned by the DHCP Server.
NOTE
After powering on the VPort 364, wait a few seconds for the POST (Power On Self Test) to run. The IP address
will be assigned when the 10 or 100 Mbps NETWORK LED blinks.
Using the
Moxa Ethernet Switch And Video Server Configuration Utility (edscfgui.exe
), as described
below:
1.
Run the
edscfgui.exe
program to search for the VPort and EDS switches. After the Utility window opens,
you may also select or click on Broadcast Search, which is located under the List Server menu, to initiate a
search (note that you can also click on the Broadcast Search icon
to initiate a search.
NOTE
You may download the Moxa Ethernet Switch And Video Server Configuration Utility (edscfgui.exe) software
from Moxa’s website at www.moxa.com.
2.
The
Broadcast Search
window will show a list of all switches and VPort located on the network. The
progress of the search will also be displayed.
