Moxa VPort 364 Industrial Video Encoder
Accessing the VPort 364's Web-based Manager
4-4
System Configuration
A button or text link on the left side of the system configuration window only appears on the administrator’s
main page. For detailed system configuration instructions, refer to Chapter 4,
System Configuration
.
Video Information
Users can easily monitor the current video performance by looking at the
Video Information
shown on the
left side of the homepage. The following properties are shown: Video Size, Video Quality (Fixed bit rate or Fixed
video quality), Max. FPS (frames per second), and (current) FPS Status. Users can select the target camera
image to view each camera’s video performance.
Show PTZ Control Panel
Users can click this link to pop up a new window for PTZ Control. To select a camera, click the target camera’s
image view.
PTZ Camera Control
If a serial device, such as a motorized camera, is attached to the COM/PTZ port, the control panel will appear
on the main page for users who have permission to operate the camera. Buttons that are active will change
color when the cursor is passed over the button. Users can control the pan, tilt, zoom, and focus functions of
motorized cameras. The home button is used to return the camera to the center position if the camera supports
this command. In addition to near and far controls for focus settings, an auto focus mode is provided. To move
the motorized camera more precisely, the speed control for pan and tilt allows users to fine tune the camera
movement. Users can also click directly on any point in the image to force the motorized camera to focus on
that point, or select a preset location from the drop-down menu. Administrators are able to add or modify the
list of preset locations. Details are described in the relevant section in Chapter 4,
System Configuration
.
