NPort W2150A-W4/W2250A-W4 Series User Manual
81
Try next type on authentication denied (default=Disable):
This field enables or disables the system to
try the next type if the first authentication is denied.
Map keys <CR-LF> (default=CR-LF):
This specifies how the
ENTER
key is mapped from the Ethernet
port through the serial port.
Option
Description
<CR-LF>
Carriage line feed (i.e., the cursor will jump to the next line and return
to the first character of the line)
<CR>
Carriage return (i.e., the cursor will return to the first character of the line)
<LF>
Line feed (i.e., the cursor will jump to the next line, but not move horizontally)
Communication Parameters
The
Communication Parameters
page for each serial port is where serial communication settings are
specified, such as
Baud rate
,
Data bits
, and
Stop bits
.
Alias
Default
Options
free text (e.g., “Secondary console connection”)
Description
This is an optional free text field to help you differentiate one serial port from another. It
does not affect operation of the NPort device server.
ATTENTION
Serial communication settings should match the attached serial device. Check the communication settings
in the user’s manual for your serial device.
Baud rate
Default
115200
Options
300, 600, 1200, 1800, 2400, 4800, 9600, 19200, 38400, 57600, 115200, 230400,
460800, 921600, Other
Description
This field specifies the baudrate for the serial port. Nonstandard baudrates are supported
through the
Other
setting. When set to
Other
, you may manually enter a baudrate of your
choice, up to 921600.
300 to 921600: The serial port will operate at the specified baudrate.
Other: The serial port will operate at a baudrate that is manually entered by the user.
Parity
Default
None
Options
None, Odd, Even, Space, Mark
Description
This field specifies the type of parity bit used for each character frame.