NPort W2150A-W4/W2250A-W4 Series User Manual
49
WLAN Settings
WLAN
The
WLAN
page is located under
WLAN Settings
in the
Network Settings
folder. You can modify
IP
configuration
,
IP address
,
Netmask
, and
Gateway
for your WLAN.
The NPort W2150A-W4/W2250A-W4 Series supports IEEE 802.11a/b/g/n wireless network interfaces. The
supported IP configurations are static and dynamic (DHCP). Users can set up the IP configuration with the
serial console, or the Web/Telnet consoles through the NPort’s Ethernet interface. For detailed information
about configuring
IP configuration
,
IP address
,
Netmask
, and
Gateway
, see the previous section,
Ethernet Configuration.
IP Configuration
Default
Static
Options
Static, DHCP
Description
This field determines how the NPort’s IP address will be assigned.
Static: IP address, netmask, and gateway are user-defined.
DHCP: IP address, netmask, gateway, DNS, and time server are assigned by the DHCP
server.
IP Address
Default
192.168.127.254
Options
IP address (e.g., “192.168.1.1”)
Description
This field is for the IP address that will be assigned to your NPort device server. An IP
address is a number assigned to a network device (such as a computer) as a permanent
address on the network. Computers use the IP address to identify and talk to each other
over the network. Choose a proper IP address that is unique and valid in your WLAN
environment. If your device server will be assigned a dynamic IP address, set the IP
configuration parameter appropriately.
