ioLogik 2500 Series
Configuration Library
4-2
Introduction
With Configuration Library, the operator uses IOxpress to store configuration options offline in IOxpress
Projects. The configuration settings are stored on the user’s computer.
Saving Configurations as a Project
IOxpress configuration schemes are called Projects (saved as *.prj files).
The first step to using IOxpress is to create a project for automating your device configuration processes.
This can be done offline, after which the project can be exported to other devices over the network during
the online configuration phase (discussed in Chapter 5: Device Library).
Projects are automatically saved in the following folder:
C:\Users\Public\Documents\Moxa\IOxpress\Database
The first time you use offline configuration, create a new project by clicking New from the dropdown menu
under the Project tab.
Click Configuration Library and then select Configuration from the toolbar. You may click on either
Add
Add Configuration… or Load from File… to add a configuration to the new project.
Adding an ioLogik 2500 Device to a Project
The ioLogik 2500 can be used as the head of a cascaded array of ioLogik E1200 modules, with Click&Go
Plus logic used to extend communication capability to the all of the expansion units.
