- 6 -
Wall Mounting
In most applications, wall mount provides an easier installation. You will
find it quite easy to mount AWK-4131 on the wall, as illustrated below.
STEP 1:
Attach the wall-mounting kit
with M4 screws, as shown in
the diagram below.
STEP 2:
Mounting the AWK-4131 on the wall
requires 4 screws. Use the AWK-4131
device, with wall-mounting kit
attached, as a guide to mark the correct
locations of the 4 screws. The heads of
the screws are recommended to be
between 5.5mm and 8.5 mm in
diameter, and the shafts should not be
more than 5.0 mm
in diameter, as
shown in the figure.
Do not drive the screws in all the way in to the wall—leave a space of
about 2 mm to allow room for sliding the wall-mounting kit between the
wall and the screws.
ATTENTION
Test the screw head and shank size by inserting the screws into
one of the keyhole shaped apertures of the wall-mounting plates
before attaching the plates to the wall.
STEP 3:
Once the screws are fixed into the wall, insert the four screw heads
through the large opening of the keyhole-shaped apertures, and then
slide the AWK-4131 downwards, as indicated to the right. Tighten the
four screws for added stability.
ATTENTION
To avoid environmental vibration or shock, you can consider a
robust installation with four bigger screws, the shafts of which are
between 7.0 mm and 8.5 mm in diameter, and fix the AWK-4131
directly on to the wall.