- 5 -
Dimensions
Attaching Antennas
The AWK-4131 includes two dual-band omni-directional antennas by
default. Attach the antennas as illustrated below:
Step 1:
Use your fingers and hold the antenna metal N-type connector.
Step 2:
Screw the antenna N-type connector (male) onto the AWK-4131
device’s N-type connector (female)
Caution
Do not hold the rubber plate to screw the antenna on to the
AWK-4131 device.
ATTENTION
Use the antennas correctly: Use 2.4 GHz antennas if the
AWK-4131 operates in IEEE 802.11b/g/n. Use the 5 GHz
antennas for operations in IEEE802.11a/n. Make sure your
antenna installation is within a safe area covered by a lightning
protection or surge arrest system.
Antenna Metal N-type
Rubber plate
