- 7 -
DIN-Rail Mounting (Optional)
The DK-DC50131 die-cast metal kit, which
can be bought separately, can enable easy
and robust installation for the AWK-4131. A
pair of DK-DC50131s is needed for DIN-rail
mounting.
To install the DIN-rail mounting kits, tightly
attach the two DIN-rail mounting kits on the
rear panel of AWK-4131 with 12 screws. (6
screws for each kit)
To Install
STEP 1:
Use the recessed button
on the spring-loaded
bracket to lock it in
position.
STEP 2:
Insert the top of the DIN rail into the slot just
below the upper hook of the DIN-rail
mounting kit. Push the AWK-4131 toward
the DIN rail until the DIN-rail attachment
bracket snaps into place.
To Release
STEP 1:
Pull out the two spring-loaded
brackets from the bottom until
they are fixed in the “release”
position.
STEP 2:
Pull the AWK-4131 out and upward.
