AirWorks AWK-3131-RCC
Web Console Configuration
3-41
SNMP MIB file for AWK-3131-RCC is embedded in the device. To export the MIB file, simply click on the “MIB
Export” button and save it to your local drive.
Load Factory Default
Use this function to reset the AWK-3131-RCC and roll all settings back to the factory default values. You can
also reset the hardware by pressing the reset button on the top panel of the AWK-3131-RCC.
Password
You can change the administration password for each of the AWK-3131-RCC’s console managers by using the
Password function. Before you set up a new password, you must input the current password and reenter the
new password for confirmation. For your security, do not use the default password root, and remember to
change the administration password regularly.
Misc. Settings
Additional settings to help you manage your AWK-3131-RCC, are available on this page.
Reset button
Setting
Description
Factory Default
Always enable
The AWK-3131-RCC’s Reset button works normally.
Always enable
Disable ‘restore to
default function’ after
60 sec
The AWK-3131-RCC’s reset to default function will be inactive
60 seconds after the AWK-3131-RCC finishes booting up.
www.ipc2u.ru
www.moxa.pro
