AirWorks AWK-3131-RCC
Getting Started
2-4
How to Test Two or More AWK-3131-RCC Units
If you have two or more AWK-3131-RCC units, you will need a second notebook computer (Notebook B)
equipped with an Ethernet port. Use the default settings for the first AWK-3131-RCC connected to notebook A
and change the second or third AWK-3131-RCC connected to notebook B to Client mode, and then configure
the notebooks and AWK-3131-RCC units properly.
After setting up the testing environment, open a DOS window on notebook B. At the prompt, type:
ping <IP address of notebook A>
and then press Enter. A “Reply from IP address …” response means the communication was successful. A
“Request timed out” response means the communication failed. In this case, recheck the configuration to make
sure the connections are correct.
www.ipc2u.ru
www.moxa.pro
