7
23. When unloading the Brush Cutter/String trimmer from the truck or other such vehicle, never drop the
engine to the ground, as doing so may severely damage the fuel tank.
24. Unless in an emergency, never drop or cast the Brush Cutter/String trimmer to the ground as doing so
may severely damage the Brush Cutter/String trimmer.
25. Always lift the entire equipment from the ground when moving it. Dragging the Equipment on its fuel tank
is extremely dangerous and may cause fuel to leak, which May cause fire.
26. If the equipment gets heavy impact or fall, check the condition before continuing work. Check the fuel
system for fuel leakage and the controls and safety devices for malfunction. If there is any damage or
doubt, ask our authorized service center for the inspection and repair.
Refueling
1. Shut off the engine during refueling, keep away from open flames and do not Smoke during refueling.
2. Ensure mineral oil products do not come into contact with skin. Do not inhale fuel vapor. Always wear
protective gloves during refueling.
3. Change and clean protective clothing at regular intervals.
4. Take care not to spill either fuel or oil in order to prevent soil contamination(environmental protection).
Clean the Brush Cutter/String trimmer immediately after fuel has been spilt.
5. To prevent soil contamination (environmental protection), make sure you do not spill fuel or oil on the
ground. If you do spill fuel, clean the Brush Cutter/String Trimmer immediately.
6. Make sure fuel does not come into contact with your clothing. If fuel does come into contact with your
clothing, change your clothing immediately to prevent fire.
7. Inspect the fuel cap at regular intervals making sure that it can be securely fastened and does not leak.
8. Carefully tighten the fuel tank cap. Once refueling is complete, move to a location at least 3 meters away
from where you refueled before starting the engine.
9. Never refuel in enclosed space such as inside a room. Doing so may cause an Explosion due to the
accumulation of fuel vapor at ground level.
10. Only transport and store fuel in approved containers. Make sure the fuel stored is not accessible to
children.
Method of operation
1. Only use the Brush cutter/String trimmer in good light and visibility. During the winter season, beware of
slippery or wet areas such as icy or snow-covered areas (risk of slipping).Always ensures you are on
safe footing.
2. Never cut above waist height.
3. Never stand on a ladder while using the Brush cutter/String trimmer.
4. Never climb up into trees to use with the Brush cutter/ String trimmer.
5. Never work on unstable surfaces.
6. Remove sand, stones, nails etc. found within the working range. Foreign objects may damage the
cutting tool and can cause dangerous kick-backs.
7. Before starting to cut, make sure the cutting tool has reached full working speed.
8. If grass or branches get caught between the cutting tool and guard, always stop the engine before
cleaning. Otherwise unintentional blade rotation may cause serious injury.
9. Take a rest to prevent loss of control caused by fatigue. We recommend taking a 10 to 20-minute rest
every hour.
Kickback (blade thrust)
1. When operating the brush cutter, uncontrolled kickback may occur.
2. Kickbacks occur frequently when attempting to cut with the 12 to 2 o’clock section of the blade.
3. Never apply the 12 and 2 o’clock section of the brush cutter blade.
