13
Fig.4C Fig.4D
6. MOUNTING THE PROTECTOR
For PBC 33 BH/PBC 32 B (DYM246601) and PBC 43 BH/PBC 42 B (DYM246801)
CAUTION:
To meet the applicable safety provisions, you must only use the tool/ protector combinations
indicated in Fig.5A/Fig.5B. Always use genuine original cutter blades or nylon cutting head.
1. The cutter blade must be well polished, and free of cracks or breakage. If the cutter blade hits against a
stone during operation, stop the engine and check the blade immediately.
2. Polish or replace the cutter blade every three hours of operation.
3. If the nylon cutting head hits against a stone during operation, stop the engine and check the nylon cutting
head immediately.
Fig.5A Fig.5B
4. Place the clamp matching the hole of the shaft. (Fig.5C/Fig.5D)
5. Fix the protector to the clamp with two bolts. (Fig.5E/Fig.5F)
Fig.5C Fig.5D
Nylon cutting head
Cutter blade
Protector
Protector
Clamp
Hole
Locking knob
