11
Sound pressure level at the
operator’s position
(Brush cutter):
/
91.4dB(A)
K=2.5dB(A)
98.7dB(A)
K=2.5dB(A)
Measured sound power level
(Grass trimmer) :
110.2(A)
K=1.11dB(A)
110.1(A)
K=1.52dB(A)
112.1(A)
K=2.10dB(A)
Measured sound power level
(Brush cutter) :
/
109.4(A)
K=1.43dB(A)
108.5(A)
K=2.98dB(A)
Guaranteed sound power level
111dB(A)
112dB(A)
114dB(A)
Net Weight:
5.4 kg
7.5 kg
8.4 kg
5. MOUNTING THE HANDLE
CAUTION:
Before doing any work on the brush cutter, always stop the engine and disconnect the spark
plug connector from the spark plug. Always wear protective gloves!
CAUTION:
Ensure you have reassembled the brush cutter completely before starting it.
5.1 Mounting the U handle for PBC 33 BH/PBC 32 B (DYM246601) and PBC 43 BH/PBC
42 B (DYM246801)
1. Place the handle: The handle with the control lever is positioned on the right (the right-hand grip side)
when viewed from the engine side, and the other handle on the left side.(Fig.2A/Fig.2B)
2. Fit the groove of the handle: Fix the attached metal with washers, bolts using the hexagon socket bolt
provided. Adjust the handle to an easy-to-operate position, and securely tighten the four hexagon socket
bolts uniformly on the right and left by wrench. (Fig.2C)
3. Place the throttle cable to the control lever side of the shaft. Attach the cable-clamp to the position shown
and then attach the cable.(Fig.2D)
4. Operate the control lever and make sure it moves smoothly.
Fig.2A Fig.2B
Right
Cable clamp
