Mowox DYM246406 Скачать руководство пользователя страница 5

 

3. If this is your first time using an engine powered cutter, consult your dealer for basic Instructions. 

4.  Children and young persons aged under 18 years must not be allowed to operate the Brush Cutter/String 

trimmer. Persons over the age of 16 years may however use the device for training purposes, only whilst 

under supervision of a qualified trainer. 

5. Use Brush Cutter/String trimmers with the utmost care and attention. 

6. Only operate the Brush Cutter/String Trimmer if you are in good physical condition. Perform all work calmly 

and carefully. User must accept responsibility for those around them. 

7. Never use the Brush Cutter/String trimmer after consumption of alcohol or medicines, or if feeling tired or ill. 

WARNING!

 This power tool produces an electromagnetic field during operation. This field may under 

some circumstances interfere with active or passive medical implants. To reduce the risk of serious or fatal 

injury, we recommend persons with medical implants to consult their physician and the medical implant 

manufacturer before operating this machine. 

Intended use of the machine

 

The Brush Cutter/String trimmer is only intended for cutting grass, weeds, bushes, and other such 

undergrowth, and should not be used for any other purpose such as edging or hedge cutting as this may 

cause injury. 

Personal protective equipment

 

1.  Always wear clothing that is both functional and appropriate to your work, i.e. tight-fitting, but not so tight 

as to cause uncomfortable movement. Do not wear either jewelry or clothing with could become 

entangled with bushes or shrubs. 

2.   In order to avoid head, eye, hand or foot injuries, as well as to protect your hearing during operation, the 

following protective equipment and protective clothing must be used while using the Brush Cutter/String 

trimmer. 

3.   Always wear a helmet where there is a risk of falling objects. The protective helmet is to be checked at 

regular intervals for damage and is to be replaced at the latest after 5 years. Use only approved protective 

helmets. 

4.  The visor of the helmet (or alternatively goggles) protects the face from flying debris and stones. During 

operation of the Brush Cutter/String trimmer, always wear goggles, or a visor to prevent eye injuries. 

5.  Wear adequate noise protection equipment to avoid hearing impairment (earmuffs, ear plugs etc.). 

6.  The work overalls protect against flying stones and debris. We strongly recommend that the user wears 

work overalls. 

7.  Special gloves made of thick leather are part of the prescribed equipment and must always be worn 

during operation of the Brush Cutter/String trimmer. 

8.  When using the Brush Cutter/String trimmer, always wear sturdy shoes with a non-slip sole. This protects 

against injuries and ensures a good footing. 

Emergency 

Familiarise yourself with the use of this product by means of this instruction manual. Memorise the safety 
directions and follow them to the letter. This will help to prevent risks and hazards. 

1. 

Always be alert when using this product, so that you can recognize and handle risks early. Fast intervention 
can prevent serious injury and damage to property. 

2. 

Turn the product off and disconnect it from the power supply if there are malfunctions. Have the product 
checked by a qualified professional and repaired, if necessary, before you operate it again. 

 

  Residual risks 

Содержание DYM246406




























Отзывы: