20
Fig.12A Fig.12B
Fig.12C Fig.12D
Note:
If the starter handle is pulled repeatedly when the choke lever remains at “on” position, the engine
will not start easily due to excessive fuel intake.
In case of excessive fuel intake, remove the spark plug and pull the starter handle slowly to remove excess
fuel. Also, dry the electrode section of the spark plug.
CAUTION:
Always reduce the engine revolutions when the equipment is not being used for work.
Operating the equipment at high revolutions when not being used for work will shorten the lifespan of the
equipment.
For PBC 33 BH/PBC 32 B (DYM246601) and PBC 43 BH/PBC 42 B (DYM246801)
Cold start
1. Push the I-O switch (1) to “I” position.(Fig.13)
2. Grasp the handle (hand pressure activates the safety lock-off lever (2)).
3. Press the throttle lever (3) and hold it down.
4. Press the lock button (4) and release the control lever, and then release the lock button (the lock button
holds the throttle lever in the start-up position).
1
2
4
3
Primer pump
Choke lever
