21
Fig.13
Starting the warm engine
Same as above, except without moving the choke lever (choke lever remains in the position “on”).
STOPPING
For U handle models
1. Release the throttle lever (3) fully, and when the engine rpm has lowered, push the I-O switch (1) to “O”
position the engine will now stop. (Fig.14)
2. Be aware that the cutting head may not stop immediately and allow it to slow down fully.
Fig.14
For PT 25 LH (DYM246406)
Cold start
1. Turning the switch to the “START” position. (Fig.15)
2. Grasp the handle (hand pressure activates the safety lock-off lever).
3. Press the throttle lever and hold it down.
Fig.15
Starting the warm engine
Same as above, except without moving the choke lever (choke lever remains in the position “on”).
STOPPING
3. Release the throttle lever fully, and when the engine rpm has lowered, turning the switch to “STOP”
position the engine will now stop. (Fig.16)
4.
Be aware that the cutting head may not stop immediately and allow it to slow down fully.
1
2
4
3
Safety lock-off lever
Throttle lever
