manualshive.com logo in svg

Mountz PTT-2000, Руководство по эксплуатации

Поделиться
Скачать
Mountz PTT-2000 Скачать руководство пользователя страница 5

Corporate Headquarters: 

1080 North 11th Street, San Jose, CA 95112    Phone: (408) 292-2214   Fax: (408) 292-2733

www.etorque.com

Page 5

S c r e e n   D i s p l a y  

When the Torque Analyzer is turned on and it is connected to a Mountz "Smart" Torque Transducer with ARCII technolo-
gy it will display a Screen similar to that below for 5 seconds and then go into Reading Mode. This will also happen if a
"Smart" transducer is disconnected and another smart transducer is connected. It will automatically detect if the sensor is
a torque or force sensor. 

Mountz PTT-2000

Version 1.06k

Tool Model

BMX250i

Serial Number

04-93-071

If an un-calibrated torque transducer or force sensor is connected then the Analyzer will display a screen as below.  

Note:

The PTT supports Non-Smart torque transducers & force sensors as well as Non-Mountz transducers. Non-
smart transducers can be detected and can be calibrated in the "internal" memory. The PTT will offer 2 
choices. It offers to calibrate or choose from a list of transducers stored in the internal memory.

Mountz PTT-2000

Version 1.06k

Uncalibrated Transducer -
Connect to Calibration 
Software

Note:

When disconnecting a smart transducer and connecting another, the operator must unplug the cable from the
PTT unit.

Содержание PTT-2000








































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды