Auto Clear
Angle Setup
T+A Threshold
First Peak
Bolt Audit
Spindle Audit
This feature is designed for auditing the torque applied to a fastener for a test such as determining relaxation after a
fastener has been tightened. An angle enabled transducer is required to operate in this Mode.
Bolt Audit*
Bolt Audit Thresholds
Initial Torque Threshold
450 N.m
Final Torque Threshold
650 N.m
Main
1. Press the
"Menu"
Button.
2. Use the
Scroll Down
key and select Setup by highlighting and pressing
Enter
.
3. Use the
Scroll Up or Down
key to toggle through the Setup options.
4. Press
Enter
key to select a setup setting for
Bolt Audit
.
Filter
Units
Mode
Setup
Selecting Bolt Audit
1. Press the
Right
or
Left
key to toggle between the threshold settings.
2. Use the
Scroll Up or Down
key to set torque thresholds.
4. Press
Enter
key once setting is complete.
5. Press
Main
button to return to main display screen.
Corporate Headquarters:
1080 North 11th Street, San Jose, CA 95112 Phone: (408) 292-2214 Fax: (408) 292-2733
www.etorque.com
Page 14
Note:
* The Bolt Audit Mode is an additional feature that is only available with PTT Bolt Audit model (Item # 072995)
