Tolerance
Auto Clear
Angle Setup
T+A Threshold
First Peak
Spindle Audit
This feature is designed for auditing the operation of a Spindle Tool. An angle enabled transducer is required to oper-
ate in this Mode. The unit checks the Torque and Angle setting of a Spindle. When the spindle stops, the PTT will dis-
play and record the final angle, and final peak torque.
Spindle Audit
Spindle Audit Thresh
Initial Torque: 43 lbf.in
Low Angle: 25 deg
High Angle: 28 deg
Main
1. Press the
"Menu"
Button.
2. Use the
Scroll Down
key and select Setup by highlighting and pressing
Enter
.
3. Use the
Scroll Up or Down
key to toggle through the Setup options.
4. Press
Enter
key to select a setup setting for
Spindle Audit
.
Filter
Units
Mode
Setup
Selecting Spindle Audit
1. Press the
Right
or
Left
key to toggle between the settings.
2. Use the
Scroll Up or Down
key to set torque torque and angle settings.
4. Press
Enter
key once setting is complete.
5. Press
Main
button to return to main display screen.
Corporate Headquarters:
1080 North 11th Street, San Jose, CA 95112 Phone: (408) 292-2214 Fax: (408) 292-2733
www.etorque.com
Page 15
