Mountfield 2105M Скачать руководство пользователя страница 5

5

ENGLISH

EN

1 GENERAL

This symbol indicates WARNING. Per-

sonal injury and/or damage to property 

may result if the instructions are not 

followed carefully.
You must read these instructions for use 

carefully, before starting up the ma-

chine.

1.1 SYMBOLS

The following symbols appear on the machine. 

They are there to remind you of the care and atten-

tion required in use.

This is what the symbols mean:

Warning!

Read the instruction Manual and the safe-

ty Manual before using the machine.
Warning!

Watch out for discarded objects. Keep on-

lookers away.
Warning!

Always wear hearing protectors.

Warning!

This machine is not designed to be driven 

on public roads.

Warning!

The machine, equipped with original ac-

cessories, may not be driven on slopes 

greater than 10º in any direction.

Warning!

Risk of burn injuries. Do not touch the si-

lencer. 

This machine is available in two versions.
• Manual transmission, designated 

2105M

.

• Hydrostatic transmission, designated 

2125H

.

1.2 References

The figures in these instructions for use are 

numbered 1, 2, 3, etc. 

Components shown in the figures are marked A, B, 

C, etc.

A reference to component C in figure 2 is written 

“2:C”.

2 SAFETY INSTRUCTIONS

2.1 GENERAL

• Please read through these instructions carefully. 

Learn all the controls and the correct use of the 

machine.

• Before use, all drivers must apply for and 

receive practical training in the operation of the 

machine. Particular emphasis should be placed 

on the fact that:
a. The use of ride-on lawnmowers requires care 

and concentration.
b. On slopes, it is not possible to control a 

sliding ride-on lawnmower by braking. The 

main reasons for losing control are insufficient 

traction, excessively high speed, insufficient 

braking, the machine not being suited to the 

task, lack of attention to the surface or incorrect 

use as a towing vehicle.

• Never let children or anyone who is not familiar 

with these instructions to use the machine. 

Local regulations may impose restrictions as 

regards the age of the driver.

• Never use the machine if others, particularly 

children or animals, are in the vicinity.

• Remember that the driver is responsible for 

accidents that happen to other people or their 

property.

• Do not let children or other passengers to ride 

with you on the machine. They might fall off 

and be seriously injured, or they might prevent 

the machine being driven safely.

• Do not use the machine if you are under the 

influence of alcohol, drugs or medication. 

Neither should you use it when you are tired or 

feeling unwell.

2.2 PREPARATIONS

• Wear strong shoes and long trousers when using 

the machine. Do not operate it barefoot or 

wearing sandals.

• Wear appropriate clothing when using the 

machine. Do not wear loose, hanging clothes, 

jewellery, scarves, ties, etc., which can get 

caught in rotating parts. Tie up long hair.

• Carefully check the area that is to be cut/cleared 

of snow. Remove all loose stones, sticks, steel 

wire and other foreign objects which the 

machine could throw out.

• Warning – Petrol is highly inflammable.

a. Always store petrol in containers that are 

made especially for this purpose.
b. Only fill or top up with petrol outdoors, and 

never smoke when filling or topping up.
c. Fill with petrol before starting the motor. 

Never remove the filler cap or fill with petrol 

while the engine is running or still warm.

Содержание 2105M













































Отзывы: