5
Three Modes
Fig. 3
LCD display shows the camera status (Estimated Battery Life).
Fig. 4
LCD display shows ‘’CAPTURING”
Then the camera returns to STANDBY mode again. The red LED indicator will
flash every 3 sec to indicate that the camera is powered ON, but is in a delay
interval.
To display the camera status when it is in STANDBY mode, press the Power/
Status button (Fig.1). It will not affect the delay interval unless the timer
is within 15 seconds of the next event. If the button is pressed within 15
seconds of the end of a delay interval, the status will display and the interval
will start over.
