4
3. THREE MODES
(change with Rotary Mode Switch)
SETUP
Turn the Rotary Dial to the SETUP position to change timelapse interval and
adjust other camera settings. Also use SETUP position when connecting
camera to computer via USB cord. See detailed instructions for SETUP menu
later in this guide.
AUTO
In the AUTO mode, the camera takes photos or videos according to the set-
tings chosen in the SETUP menu. When the Rotary Mode Switch is turned to
AUTO, the camera status (Fig. 2 & 3) is displayed for 10 seconds, then the first
photo or video is captured (Fig. 4), then the camera enters STANDBY mode
(note: the display will turn off) and the LCD display goes off, and begins
counting down its timelapse interval. The camera will wake up and capture
(Fig. 4) when it is ready to record a picture or video.
Note:
for timelapse interval ‘ASAP’, the camera will not go into STANDBY mode
between shots (approx. 3-4 seconds delay between shots).
For time lapse interval ‘ASAP’ and ‘10 SEC’, if ‘VIDEO’ is selected, only a ‘LOW’
(640 x 480) picture will be taken.
Fig. 2
LCD display shows the camera status.
