header
17
VIEWING IMAGES cont.
5. Preview Search
Click the Search button to do an automatic
Preview scan of your images. The scan pauses
when the software detects a change in pixel
content from the last photo viewed. Detection is
based on averaging picture changes so this mode will skip some
images and should only be used to preview a set of images quickly.
The frame counter on the slider bar turns black when searching.
Note: this is the least precise of the viewing modes but it is automatic, quick and easy.
IMPORTANT- The accuracy of this search is determined by the Sensitivity, Region and Step
settings you select. The use of all three settings can maximize your results.
5.1 Sensitivity
Set to High, Medium or Low -
This sets the level of pixel change the
program will detect. Note: a pixel
change will occur with a color, intensity,
lighting or movement so this setting
is critical to obtain the desired results.
5.2 Search Region
A. Click on (Set Search Region) Button.
B. Minimize Search Settings screen.
C. This allows you to define a specific
search area, rather than the whole
photo. Just Drag the red outline to
the area you want to search. This
allows you to focus on a very precise
area if required.
D. Click (OK) to confirm your settings
and exit the menu.
IMPORTANT- This setting will increase the
sensitivity settings and could produce erratic
results. Use with caution.
