![background image](http://html1.mh-extra.com/html/moulinex/fresh-express-mov/fresh-express-mov_manual_1840108012.webp)
19
USEFUL TIPS FOR BEST RESULTS
We recommend that you tip your appliance forwards during use to help
the exit of food and to improve the quality of your prepared food. Never
use your appliance tipped backwards as this would cause a blockage (fig.
8). We also recommend that you do not push too hard on the pusher (H)
when using Swiss cheese or any other soft ingredient.
The ingredients that you use must be sufficiently firm to obtain satisfactory
results and to avoid accumulation of food in the container.
Cut the food so that it is easier to fit in the feed tube on the lid.
CLEANING
• Always unplug the appliance before cleaning the motor unit
(A)
.
• Do not immerse the motor unit, do not place under running water. Clean
the motor unit using a damp cloth. Dry it carefully.
• The container
(D)
, the disk support attachment
(E)
, the disks
(F1, F2, F3)
,
the lid
(G)
, the pusher
(H)
and the disk storage attachment
(I)
can be
put in the dishwasher in the upper basket using the "ECO" or "QUICK
WASH" program.
• Handle the disks with care as the blades are very sharp.
• If the plastic parts become stained by foods such as carrots, rub the
discoloured areas with a cloth soaked in vegetable oil and then clean
as normal.
STORAGE
• All the disks
(F1, F2, F3)
can be stored on the disk storage attachment
(I)
(fig. 9)
which is then placed on the motor unit and clicked into position
(fig. 10)
.
• Power cord storage: wind the cord around the appliance's handle
(fig. 11)
.
18
Grater
disc F1
(orange)
Slicer
disc F2
(green)
Shredder
disc F3
(yellow)
Carrots
•
•
Courgettes
•
•
Potatoes
•
•
Cucumbers
•
•
Peppers
•
Onions
•
Beetroots
•
Cabbage (white/red)
•
Apples
•
Parmesan
•
Swiss cheese
•
•
Chocolate
•
•
Dry bread/melba toasts
•
Hazels/walnuts/almonds
•
Coconut
•
Use the disk specified for each type of food:
• Position the disk on the space provided on the white disk support
attachment
(E)
as indicated
(fig. 2)
.
• Then place the disk support attachment with the chosen disk on the
drive shaft
(B) (fig. 3)
.
• Then position the lid
(G)
; turn it clockwise until it locks
(fig. 4)
, confirmed
by a "click".
• Plug in the appliance.
• Press the on/off push button
(C)
.
• Insert the food through the feed tube on the lid
(G) (fig. 5)
, and push the
food with the aid of the pusher
(H) (fig. 6)
.
• To change the disk, unlock the lid
(G)
, remove the entire disk support
attachment
(D and E) (fig. 7)
then remove the disk by pulling upwards
until it comes out of the support attachment.
• Make sure to clean the disk support after use to make sure food does
not block the insertion of the new disk.