manualshive.com logo in svg

MOTU PCI-424, Руководство пользователя

"Музыкальный интерфейс MOTU PCI-424 - это надежное устройство для записи аудио. Для полного понимания возможностей этого продукта обязательно загрузите бесплатное руководство пользователя на manualshive.com. Настройте свое оборудование правильно и наслаждайтесь качественным звучанием вашей музыки."

Поделиться
Скачать
background image

 

CHAPTER

 

  A B O U T   T H E   P C I E - 4 2 4   S Y S T E M

 

6

 

1

 

About the PCIe-424 System

 

OVERVIEW

 

The PCIe-424 core system is a computer-based hard disk 
recording system for Mac OS and Windows that offers 24 
simultaneous inputs and outputs per Audio Wire cable, 
expandable to 96 inputs/outputs. A core system consists of a 
PCI card connected to a standard 19-inch, single-space, 
rack-mountable audio interface.

The system includes AudioDesk™, full-featured audio 
workstation software for Mac OS that supports both 16-bit 
and 24-bit recording at any standard sample rate up to 192 
kHz.

For Windows, a WDM driver is included for compatibility 
with audio applications that support standard multi-channel 
WDM and Wave drivers.

Also included is an ASIO driver for multi-channel operation 
with Steinberg Cubase and other ASIO-compatible software.

The PCIe-424 card  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  6

The 2408mk3 interface  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  7

The 24I/O interface  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  8

The HD192 interface  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  8

16-bit and 24-bit recording. . . . . . . . . . . . . . . . . . . . . . . . . . .  9

AudioDesk . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  9

Digital Performer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  9

Other Audio Software  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  9

A computer-based system . . . . . . . . . . . . . . . . . . . . . . . . . . . .  9

THE PCIE-424 CARD

A PCIe-424 core system ships with a single PCI audio card 
called the PCIe-424. The card features a custom processor, a 
powerful DSP chip, four 6-pin Audio Wire connectors and 
an ADAT SYNC IN connector.

High definition audio

The PCIe-424 system can operate at the following high 
sample rates: 44.1, 48, 88.2, 96, 176.4 and 192 kHz. All 
MOTU PCIe-424 audio interfaces support rates up to 96 
kHz. In addition, the HD192 interface offers analog 
recording and playback at 176.4 or 192 kHz.

Audio Wire expansion

The PCIe-424 card provides four Audio Wire jacks, which 
are used to attach MOTU PCI audio interfaces to the card 
installed in the computer. Each Audio Wire is capable of 

transmitting 24 simultaneous channels of 96 kHz digital 
audio input and output or 12 simultaneous channels of 192 
kHz input and output.

Up to four MOTU PCI audio interfaces can be connected to 
a single PCIe-424 card for a maximum of 96 possible input 
and output connections. All MOTU PCI audio interfaces 
(including the 2408mk3, 24I/O and HD192) can also be 
“mixed and matched” on the PCIe-424 card, along with 
legacy interfaces, such as the 2408, 2408mII, 1296, 1224, 24i 
and 308.

Audio Wire carries a proprietary communication protocol 
between the card and the external I/O to handle the 
extremely low latencies required by the system. The heart of 
the PCIe-424 card is a custom-programmed VLSI chip 
capable of simultaneously processing all 96 inputs and 
outputs (192 channels total) at samples rates up to 96 KHz. 
At 176.4 or 192 kHz, this chip can process 48 simultaneous 
channels of input and output.

The custom chip handles all of the system’s I/O processing, 
freeing up the host computer’s processing bandwidth for 
real-time DSP effects and hard disk I/O.

CueMIx DSP

The PCIe-424 card features CueMix DSP™, a flexible 
DSP-driven mixing and monitoring matrix that provides the 
same near-zero monitoring latency as today’s latest digital 
mixers. CueMix DSP™ allows you to connect keyboards, 
synth modules, drum machines, and even effects processors 
and then monitor these live inputs with no audible delay and 
no processor drain on the host computer’s CPU. The CueMix 
DSP engine resides on the PCIe-424 card, so it works across 
all interfaces connected to the card. The included CueMix 
Console software provides an on-screen mixer that gives you 
hands-on control of your monitor mix, regardless of what 
audio software you prefer to use. Digital Performer users 
have the additional option of controlling CueMix DSP 
directly within Digital Performer’s mixing environment. 
CueMix DSP completely eliminates the buffer latency 
associated with monitoring on host-based recording 
systems.

Sample-accurate synchronization

The PCIe-424 card’s standard 9-pin ADAT SYNC IN 
connector provides sample-accurate synchronization with 
all ADATs or other ADAT Sync-compatible devices 
connected to the system. For example, if you digitally 

Содержание PCI-424















































































































































































































































































Отзывы:

Нет отзывов

Похожие инструкции для PCI-424

Gallagher T10 Installation Note preview
T10
Бренд: Gallagher Страницы: 11
SIIG JU-EC2012-S1 Quick Installation Manual preview
JU-EC2012-S1
Бренд: SIIG Страницы: 8
Sunrich Tech U-1000 User Manual preview
U-1000
Бренд: Sunrich Tech Страницы: 11
IBM RedBooks Broadcom 10Gb 2-Port and 4-Port Ethernet... At-A-Glance Manual preview
RedBooks Broadcom 10Gb 2-Port and 4-Port Ethernet...
Бренд: IBM Страницы: 10
Icy Box IB-PCI208-HS Manual preview
IB-PCI208-HS
Бренд: Icy Box Страницы: 20
S2Konnect N-3020SX User Manual preview
N-3020SX
Бренд: S2Konnect Страницы: 24
M-Audio Delta 410 Manual preview
Delta 410
Бренд: M-Audio Страницы: 56
Vantec UGT-ST310R User Manual preview
UGT-ST310R
Бренд: Vantec Страницы: 20
Exsys EX-6450 Manual preview
EX-6450
Бренд: Exsys Страницы: 2
Stanley RoamAlert Installation Manual preview
RoamAlert
Бренд: Stanley Страницы: 20
Broadcom BCM943227HMB User Manual preview
BCM943227HMB
Бренд: Broadcom Страницы: 15
Broadcom BCM943228Z Installation Guidance preview
BCM943228Z
Бренд: Broadcom Страницы: 24
Blackmagicdesign Intensity Operation Manual preview
Intensity
Бренд: Blackmagicdesign Страницы: 28
Bplus Technology ECSC Installation Manual preview
ECSC
Бренд: Bplus Technology Страницы: 3
Atech Flash Technology PRO-8 User Manual preview
PRO-8
Бренд: Atech Flash Technology Страницы: 18
Avante U-3000 User Manual preview
U-3000
Бренд: Avante Страницы: 13
ERMA SSI 1417-S04 Instruction Manual preview
SSI 1417-S04
Бренд: ERMA Страницы: 20
Vision Systems VScom 100E PCIex User Manual preview
VScom 100E PCIex
Бренд: Vision Systems Страницы: 40

Бренды по названию

Популярные бренды

Загрузить еще бренды