manualshive.com logo in svg

MOTU PCI-424, Руководство пользователя

"Музыкальный интерфейс MOTU PCI-424 - это надежное устройство для записи аудио. Для полного понимания возможностей этого продукта обязательно загрузите бесплатное руководство пользователя на manualshive.com. Настройте свое оборудование правильно и наслаждайтесь качественным звучанием вашей музыки."

Поделиться
Скачать
background image

  P E R F O R M A N C E   T I P S   &   T R O U B L E S H O O T I N G

111

Now all inputs coming into Bank A will be routed 
to all outputs on every Bank.

No inputs available in host application

Check to make sure you have the desired inputs 
and/or outputs enabled in the MOTU PCI Audio 
Console. The inputs will be check boxes, and 
outputs will have pop-up menus. Selecting From 
Computer will enable an output to be used by your 
audio application.

Interface banks not visible in the MOTU PCI Audio 

Console

This would indicate that there is a communication 
problem between the PCI-424 card and the audio 
interface. Check your Audio Wire connection to 
make sure it is seated firmly at both ends. To 
reestablish communication, open the MOTU PCI 
Audio Console, set the clock source to PCI-424 
internal, and press the refresh button. If this fails, 
try connecting the audio interface to one of the 
other Audio Wire connections on the PCI-424 card 
and repeat the above procedure for reestablishing 
communication.

MOTU PCI Audio Console - Can't locate the 

SPDIF input

SPDIF is only available on Bank C of the 2408mk3. 
Configure Bank C for SPDIF in the MOTU PCI 
Audio Console and make sure that the input is 
enabled.

Monitoring - How to monitor inputs?

Please refer to the documentation for the audio 
application that you are using. If your application 
does not support input monitoring, you will need 
to use the Cuemix Console application that is 
installed with the PCI-424 system drivers. Please 
see “CueMix DSP hardware monitoring” on 
page 94.

Noise on shutdown

When you quit your audio software, or shut down 
your computer, your interface will switch to stand 
alone mode. In stand alone mode, the 2408mk3 is 

acting as a format converter. If the 2408mk3 is set 
to an invalid clock source, you may get noise on the 
outputs of the 2408mk3. To avoid this, make sure 
that the 2408mk3 has a valid clock source setting in 
stand alone mode. If you are not sure, set it to 
Internal.

PCI-424 hardware randomly goes offline

Check that the Audio Wire cable is well seated into 
the PCI-424 card and the interface.

Controlling latency

The samples per buffer size setting in the MOTU 
PCI Audio Console, determines the size of the 
audio buffer before audio is processed. This value 
also controls the amount of monitoring latency. At 
its lowest setting, a 32 sample buffer, the 
monitoring round trip is a mere 64 samples. You 
can accomplish even lower latency using “Direct 
Hardware Playthrough” which monitors audio at 
the hardware level. For further details, see 
chapter 10, “Reducing Monitoring Latency” 
(page 91).

Can’t locate inputs and outputs in host software

Be sure you have enabled inputs in the PCI Audio 
Console. Click the Enable Routing check box to see 
all inputs and outputs. For details, see “Enable 
routing” on page 69.

CUSTOMER SUPPORT

We are happy to provide customer support to our 
registered users. If you haven’t already done so, 
please take a moment to complete the registration 
card included with your PCI-424 system. When we 
receive your card, you’ll be placed on our mailing 
list for free software updates and information 
about new products.

REPLACING DISKS

If your PCI-424 system software CD becomes 
damaged and fails to provide you with fresh, 
working copies of the program, our Customer 
Support Department will be glad to replace it. You 

Содержание PCI-424















































































































































































































































































Отзывы:

Нет отзывов

Похожие инструкции для PCI-424

National Instruments IMAQ PCI-1408 User Manual preview
IMAQ PCI-1408
Бренд: National Instruments Страницы: 61
UGREEN 50540 User Manual preview
50540
Бренд: UGREEN Страницы: 24
Vanderbilt VR4 S-MF Series Installation And Mounting Instructions preview
VR4 S-MF Series
Бренд: Vanderbilt Страницы: 24
Velleman PCUSB9 Manual preview
PCUSB9
Бренд: Velleman Страницы: 8
Ziatech Corporation zPM11 Hardware Manual preview
zPM11
Бренд: Ziatech Corporation Страницы: 94
Acorn computer Bitstik User Manual preview
Bitstik
Бренд: Acorn computer Страницы: 182
TBS technologies TBS6304 User Manual preview
TBS6304
Бренд: TBS technologies Страницы: 22
Leuze electronic LSIS 222 Technical Description preview
LSIS 222
Бренд: Leuze electronic Страницы: 95
Clas Ohlson MCR20E2140S Manual preview
MCR20E2140S
Бренд: Clas Ohlson Страницы: 4
Philips SWF2620/10 User Manual preview
SWF2620/10
Бренд: Philips Страницы: 2
Philips PH11107-B Quick Installer'S Manual preview
PH11107-B
Бренд: Philips Страницы: 35
Jinmuyu Electronics MR7901UC User Manual preview
MR7901UC
Бренд: Jinmuyu Electronics Страницы: 7
Jinmuyu Electronics MR800UC User Manual preview
MR800UC
Бренд: Jinmuyu Electronics Страницы: 7
Jinmuyu Electronics MR810 series User Manual preview
MR810 series
Бренд: Jinmuyu Electronics Страницы: 7
Jinmuyu Electronics MR801 Series User Manual preview
MR801 Series
Бренд: Jinmuyu Electronics Страницы: 7
Jinmuyu Electronics MR763 Series User Manual preview
MR763 Series
Бренд: Jinmuyu Electronics Страницы: 6
Jinmuyu Electronics MR7622 series User Manual preview
MR7622 series
Бренд: Jinmuyu Electronics Страницы: 7
Jinmuyu Electronics JMY609A User Manual preview
JMY609A
Бренд: Jinmuyu Electronics Страницы: 17

Бренды по названию

Популярные бренды

Загрузить еще бренды