AX34509b_e.doc / Mrz-16
Page 14 / 38
5.
The Parameter Menu
The menu provides one section with “basic parameters” and another section with “operational
parameters”. On the display you will only find those parameters which have been enabled by
the basic settings. E.g. when the Linearization Functions have been disabled in the basic set-up,
the associated linearization parameters will also not appear in the parameter menu.
All parameters, as good as possible, are designated by text fragments. Even though the
possibilities of forming texts are very limited with a 7-segment display, this method has proved
to be most suitable for simplification of the programming procedure.
The subsequent table is to show the general structure of the whole menu only.
Detailed descriptions of all parameters will follow in section 6.
Menu overview:
Basic Parameters
AX 345
AX 347
AX 348
„n)odE“
„n)odE“
„n)odE“
„briGht"
„briGht"
„briGht"
"UPdAt”
"UPdAt”
"UPdAt”
„CodE „
„CodE „
„CodE „
„LinEAr"
„LinEAr"
„LinEAr"
"Crnd"
"Crnd"
"Crnd"
„Src 1 "
"S-Unit"
„CHAr 1"
"S-Forn"
„Src 2 "
"S-bAUd"
„CHAr 2"
„HYSt 1"
„HYSt 2"
